The Perfect Tool Graphite Glass Bead Lampwork Pro Kit I

Description

The Perfect Tool
Pro Kit I
This Kit Consists of the Following Items:
Item #521000120 –
Torch Mount Universal (Fits up to 1-1/4” Dia. Torch)
Item #522000010 –
Plain Marver Top
Item #522000110
–
TPT Focal Bead Barrel/Olive Shaper Radial Cone
Item #522000270 –
TPT Monster Masher
Item #522000280 –
TPT Angled Groove Plate
Item #523000210 –
TPT Spirals Entangled
Item #526001510 –
8 Point Wide Groove Push Mold
Item #528000150 –
Mandrel Steady Rest
Item #528000201 –
Comfort Grip Marver Large Handle
Item #529000100
–
Mother Board 1/2” x 9” x 15”
Item #529000200 –
Glass Rod Support Bar
** Torch and glass rods are not included **
ITEM #521000120 –
TORCH
MOUNT
UNIVERSAL
(FITS UP TO 1-1/4”DIA TORCH)
The base allows you to use any of our Perfect Tool attachments. Attach the base to your torch, set The Perfect Tool attachment on top of the base. It will not move and the secure base allows easy use of all our Perfect Tool designs.
The base allows you to change your design with the same Perfect Tool attachment, by just giving the attachment a quarter turn.
You can now focus on your glass art and not the tool!
Tools will become hot with use, we suggest using a hot pad or kitchen tongs when removing or exchanging the attachments.
Base includes a steel mounting plate extending past the graphite, perfect for using as a warming shelf. The mount itself is 3/4" x 2” x 3”. The Torch Mount Universal Base fits up to a 1-1/4” Dia. Torch.
ITEM #52200010 –
PLAIN MARVER TOP
The Plain/Flat Marver attachment is designed to use with The Perfect Tool torch mount system or table top Quad Base to manipulate your glass art.
Dimensions:
Outside of the tool is 2” x 3” x 1/2"
ITEM #522000110 –
TPT FOCAL BEAD/BARREL/OLIVE SHAPER/
RADIAL CONE
The Perfect Tool Barrel/Olive Shaper attachment is designed to use with The Perfect Tool torch mount system or table top Quad Base to manipulate your glass art. You will discover many different techniques when using this tool. As with all The Perfect Tool attachments this can be rotated on the Torch Mount by giving it a quarter turn to your desired position.
Dimensions:
Outside of the tool is 2” x 3” x 3/4"
Barrel/Olive tapers from 3/4" to 2-3/8” wide
Depth contours from 1/8” to 1/2” deep the width of the item.
ITEM #522000270 –
MONSTER MASHER
Use this attachment with The Perfect Tool Torch Mount to manipulate your glass art. You will discover many different techniques when using this tool. As with all The Perfect Tool attachments this can be rotated on the Torch Mount by giving it a quarter turn to your desired position.
Just set the attachment on top of the base and start shaping your glass art.
Dimensions:
Outside of the tool is 1/2" x 2” x 3”
Slot is approximately 1-1/4” Wide running the full 3” Length approximately 5/16” Deep.
ITEM #522000280 –
TPT ANGLED GROOVE PLATE
Use this attachment with The Perfect Tool Torch Mount to manipulate your glass art. You will discover many different techniques when using this tool. If you are looking for a little different of a design with the same tool, just turn the attachment a quarter turn on the base and experiment with the tool positioned that way.
Dimensions:
Outside of the tool is 1/2” x 2” x 3”
The slots/grooves are cut on 90 degree angles with the following widths:
1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 9/16”.
ITEM #523000210 –
TPT SPIRALS ENTANGLED
Using this press attachment with your torch allows you to create spirals entangled with each other. You will discover many different techniques when using this tool. Change the design a little by rotating the attachment a quarter turn.
Dimensions:
Outside of the tool is 1/2” x 2-1/8” x 3-1/8”
Spirals vary from 1/4” to 3/4” long and 1/2” to 1-1/4” wide
ITEM #526001510 –
8 POINT WIDE GROOVE PUSH MOLD
The graphite mold can be used for molten glass or as a polymer clay push mold that you can bake the polymer in before de-molding. Polymer bakes at a relatively low temperature so this will never affect the mold. This mold can be reused countless times. If used for polymer, no lubrication is needed. Glass will never stick inside this mold, and is great for glass blowing, molds, precious metal molds, and much more!
Dimensions:
Outside of the tool is 1/2” x 2” x 2”.
1-1/8” Diameter at the top and a progressively smaller cavity about 7/16” deep.
ITEM #528000150
–
MANDREL STEADY REST
This dual purpose Mandrel Steady Rest was designed to be an aid in gaining more stability for making better lampworking beads. If you are one who is a little shaky while spinning your bead then this tool can greatly improve your bead making skills by letting you rest the mandrel on either side or across the entire length of the Mandrel Steady Rest. This allows you better bead control to let you focus more on the shape and bead design and not your hands.
When properly set up this tool will allow you greater stability for nicer shapes no matter what part of the mandrel you work on. You can work from any direction, left, right, or middle of the mandrel.
In addition if you just want to pre-warm your glass rods before using them this tool can actually make that possible without the need of sticking them into the kiln and taking up valuable space for your new creations.
Dimensions:
The graphite is saw cut to 3-3/4” wide, 4-1/2” Tall and 4” Deep.
There is a 3” gap cut out in the middle and it is about 4” high.
There are also 5 ascending steps/grooves on either side of the rest.
ITEM #522000201 –
COMFORT GRIP MARVER LARGE HANDLE
The Comfort Grip Marver is used to design and shape your glass art. It can be adjusted by turning the graphite head to a comfortable position for you. Once in position no further adjustment is needed or advised. It is a universal tool, for right or left hand. The handle/grip was designed for your comfort while you work.
ITEM #529000100 –
MOTHER BOARD 1/2” X 9” X 15”
Two graphite plates are cut on an angle which fit together to create a smooth work surface, large enough on which to place your glass art tools, and still have an area to work glass. This tool was designed to raise your work surface and let you be more comfortable so you can do what you enjoy doing, longer…
Bricks (not included), or other suitable material can be used to provide an elevated surface directly in front of your torch. Graphite will transfer heat, so please
do not
use wood or cardboard.
The graphite is sawed to 9” x 15” long at the tip of the angle. It is then sanded and polished with a fine grit paper to produce a super smooth surface.
ITEM #529000200
–
GLASS ROD SUPPORT BAR
The Glass Rod Support Bar has 20 grooves to hold several colored stringers or glass rods. You now have a place to lay hot glass rods without getting thermal shock or have them roll away.
This tool can help you become more organized and comfortable knowing your tools are within your reach!
Dimensions:
Outside of the tool is 8” long and 1/2” wide.
The grooves are 1/4” wide and 1/8” deep.
There are about 20 grooves in each support bar
Designed by
Hillside
Gardens
Art Studio
Great for glass blowing, molds, and precious metals molds, etc. Graphite is easy to machine, but very dirty and abrasive to tools and machines. Graphite uniquely withstands great temperatures as well.
Our Marble Molds, TPT (The Perfect Tool) Molds, and Optic Molds have enormous possibilities with your skills and abilities with Inventive Creativity and Originality.
Learn more about our company and what we do… Please see, my “About Me” page…
ALL PACKAGES ARE SHIPPED USPS PRIORITY MAIL WITH NO SIGNATURE REQUIRED.  IF YOU WOULD LIKE EXPEDITED SHIPPING, A SIGNATURE REQUIRED, OR
A DIFFERENT SHIPPING METHOD,
PLEASE CONTACT ME SO I CAN SHIP ACCORDINGLY.  THANK YOU.
International Buyers
– Please be aware that Weaver Industries complies with all exporting regulations. Graphite products do appear on the Bureau of Industry and Security Commerce Control List. Exporting to certain countries may require an Export License according to the Export Administration Regulations. Shipping time may be delayed and final shipping costs may be higher than quoted. Buyer is responsible for all actual shipping charges, taxes and duties to clear customs. We will also require completion of U.S. Department of Commerce Bureau of Industry and Security form BIS-711 (Statement by Ultimate Consignee and Purchaser) be completed. Please contact Weaver Industries prior to purchasing our products to verify what is required to export this product to your country.
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.