-40%
New Edwards 50 ton 3 ph Ironworker IW50-3P230 FREE SHIPPING
$ 6335.47
- Description
- Size Guide
Description
4 stationsDedicated coper notcher station
10 inch capacity bar shear
Punching station: 1 inch thru 5/8 plate
Angle shear 4 x 4 x 1/4 or 3 x 3 x 3/8
ALSO AVAILABLE IN 208V 3PH AT THE SAME PRICE
AVAILABLE IN 230V 1PH FOR 099
AVAILABLE IN 460V 3PH FOR 899
The Jaws 50 ton Ironworker is a fully featured ironworker with a small footprint. Featuring four available workstations, the Jaws 50 ton incorporates an open tooling station that can hold a variety of optional tooling. A coper notcher, 10 inch bar shear, angle shear and heavy duty punch station are all standard features.
This Edwards ironworker is also equipped with and electric stroke control. This easy to adjust system speeds up production time by limiting the stroke of the machine to just enough to complete the task at hand. It can also be helpful when using special tooling that requires a limited stroke to perform properly.
Like all Edwards machines, this unit works in a completely vertical motion - straight down on the work. There is no arc of tool against the material to be cut or punched. All stations operate as a unit so you can move from punch to shear to angle shear without changing or adding any new equipment.
Warranty:
1 year manufacturer's warranty
•
Stations:
4
•
Rated Capacity (tons):
50
•
Punching Capacity (Std):
1 inch diameter in 5/8 plate
•
Punching Throat Depth (inches):
7
•
Punching Work Height (inches):
37.625
•
Flat Bar Shearing Max Width (inches):
1/2 x 10
•
Flat Bar Shearing Max Thickness (inches):
3/4 x 4
•
Flat Bar Shearing Max Round Cap (inches):
3/4
•
Flat Bar Shearing Max Square Cap (inches):
3/4
•
Flat Bar Shearing Work Height (inches):
35.5
•
Angle Shear Max Size 90 Deg (inches):
4 x 4 x 1/4 or 3 x 3 x 3/8
•
Angle Shear Work Height (inches):
40.75
•
Open Station Work Height (inches):
43
•
Throat Depth (inches):
7
•
Open Height (inches):
8.125
•
Shut Height (inches):
7
•
Brake Capacity (inches):
8
•
Stroke (inches):
1.125
•
Cycle Time:
2 seconds
•
Motor (Std):
5 hp, 1725 rpm
•
Hydraulics:
3.5 gpm - 1 stage
•
Valve Pressure:
2500 psi
•
Reservoir Capacity:
7 gallon
•
Cylinder:
2-1/2 inch ram
•
Weight (pounds):
1550
•
Dimensions (LxWxH):
28.25 x 38.5 x 54
FOR FREE SHIPPING CALL 866-532-296 2
ORDERS? QUESTIONS? CALL US 866-532-296 2
Please note this item ships direct from the manufacturer. Lead time may exist. Please call us before ordering to check stock.
We are an authorized distributor for Edwards products. Please Email me Tom at moore-tool dot com or call me with any questions.
Best regards,
Tom Moore
Moore Tool & Equipment
866-532-296 2
Tom at moore-tool dot com
moore-tool.com