Buffalo 27UD Ironworker 130 tons 30" throat 6 x 6 angle iron

Description

Buffalo Model 27 UD Ironworker.
Specifications in 65,000 lb tensile strength mild steel are:
130 tons of punch power, 1 3/8" diameter hole in 1" thick 65,000 lb tensile strength material
30 inch deep throat! and extra high throat for working large H-beams!
14" wide bar shear with max of 1" thick (not sure of width.  Data sheet is vague on that one)
6 x 6 x 3/4" angle iron at 90 degrees and 4 x 4 x 5/8" angle at 45 degrees miter
2 1/8" square shear capacity
2 1/2" round bar capacity
15 HP motor, presently on 440/480 volt
Shipping weight 21,000 lbs
Shipping dimensions130" tall (with 4x4 runners under it), 127" long, and 71" wide
10 ft 6 in tall
1 3/4" of stroke in mechanical movement
Central oiling system and grease points for lubrication
Will discuss loading arrangements with a serious potential buyer.  Flatbed loading is the only way I can easily do without making other arrangements or preparation.  Contact me about that.
pinpointmachine.com is where to find us.
Sells used, as-is, and buyer agrees to install in compliance to applicable safety regulations and codes.  Seller offers no warranty of performance or suitability to any purpose.