1/2 in. (0.710 o.d.) x 500 ft. poly drip irrigation tubing | watering system new

Description

Made with premium quality polyethylene resins, DIGs 0.710 OD drip irrigation poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations. The drip tubing, commonly referred to as poly tubing, blank tubing or drip hose, is used as the primary supply line of a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected to deliver water to the plant areas. DIGs drip irrigation poly tubing coil has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life.
Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground
Resistant to cracking, heat, UV rays and chemicals
Produced using dows 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
Use with DIGs 0.710 compression fittings, color blue, and nut lock fittings
Dimensions: 500 ft. with 0.620 ID x 0.710 OD
Bending radius: 1 ft.
Maximum operating pressure: 60 psi
Can be installed above or below ground
DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
WE DO NOT SHIP TO CALIFORNIA